$14.95 Flat Rate Shipping on all orders below $299.99 Free Delivery on orders over $299.99 Australia Wide.  Phone 1800 104 321 or 08 86326564

LED Drivers

With so many alternatives available, finding LED drivers might be more challenging than you think. When deciding which one is ideal for you, there are several aspects to consider. One notable factor is whether you require a constant current or constant voltage LED driver.

Constant current and constant voltage drivers are both solutions for powering LED light sources; the difference is in how the power is delivered and that they are not interchangeable. LED drivers are the driving force behind LEDs, supplying and regulating the required power to ensure that they work safely and consistently. Knowing the differences between the two categories will help you assist in the appropriate powering of LEDs.

Constant Current:
Constant current LED drivers are designed to operate within a specific range of output voltages and a specified output current (mA). LED’s that require a constant current driver require a nominated output current, which is commonly measured in milliamps (mA) or amps (A). These drivers vary the voltage in the electrical circuit, allowing the LED system’s current to stay constant. The ideal method of driving high power LED’s is with a constant current driver, which allows for consistent light output across all LED’s in series.

Constant Voltage:
Constant voltage drivers have a single direct current (DC) nominated output voltage. Amongst all models, 12VDC and 24VDC are the most common LED drivers (or Power Supplies). For appropriate installation, a constant voltage LED light will specify the required input voltage that it requires to function properly.

A constant voltage LED driver converts regular mains power (120-277VAC), to a constant direct current (DC) output voltage. You must install an LED driver that is capable of operating at the specified total amperage, and regardless of the load, the output voltage will always remain constant.

  1. LED DRIVER 12V CONSTANT VOLTAGE 12W MAX
    LED DRIVER 12V CONSTANT VOLTAGE 12W MAX
    $29.80
    |
  2. Destiny Plus Multi-Watt Selectable Driver 36W - 2221
    Destiny Plus Multi-Watt Selectable Driver 36W - 2221
    $37.14
    |
  3. Destiny Plus Multi-Watt Selectable Driver 22W - 2222
    Destiny Plus Multi-Watt Selectable Driver 22W - 2222
    $24.31
    |
  4. D40 DALI 2.0 Driver 2223 - 2223
    D40 DALI 2.0 Driver- 2223
    $69.00
    |
  5. D60 DALI 2.0 Driver- 2224
    D60 DALI 2.0 Driver- 2224
    $78.00
    |
  6. T35 TRIAC Driver 17001 - 17001
    T35 TRIAC Driver 17001 - 17001
    $49.30
    |
  7. LED DRIVER PEKO 3w 350mA Constant Current - LED-CC350-3
    LED DRIVER PEKO 3w 350mA Constant Current - LED-CC350-3
    $11.80
    |
  8. Electronic Driver Output 12V 70W 52901G2
    Electronic Driver Output 12V 70W 52901G2
    $18.00
    |
  9. Flicker-Free Driver Multi-Watt Selectable Driver (36W)-2221
    Flicker-Free Driver Multi-Watt Selectable Driver (36W)-2221
    $40.00
    |
  10. SupValue ST64 E27 Filament Globe-163122
    SupValue ST64 E27 Filament Globe-163122
    $11.00
    |
  11. Flicker-Free Driver Multi-Watt Selectable Driver (22W)-2222
    Flicker-Free Driver Multi-Watt Selectable Driver (22W)-2222
    $26.00
    |
  12. D40L Driver-2227
    D40L Driver-2227
    $57.00
    |
Page
per page

All prices are in Australian Dollars and include GST. GST will be removed from your order if you are ordering from outside Australia.